Application
Individual use for processes where controlled DC power supplies are needed. Electrolytic Special Applications and Plating Processes, Pulse Applications
Product Design
Modular, high-frequent 1/2 19″ switch-mode PSP Family rectifiers, alpha L including a standardized analog interface. EMC-compliant and rounded-up with a high-tech finish the PSP Family Modules and Plug-in Units are intended for the installation in an industrial control cabinet. One of the outstanding features of this compact power supply is the constant low ripple which provides excellent DC quality.
Beyond galvanically isolated setpoint and actual values (0-10 VDC), optional
4-20 mA or Profibus DP the devices are short-circuit proof and resistant against over temperatures.
Our module alpha L is also available as a PSP Box.
Block Diagram
The switch-mode rectifier is featured with the following five functions:
High-frequent disturbances are reduced in the mains filter (1). On the other hand the mains filter is used to dampen the interference voltages. The mains rectifier converts the voltage into DC voltage (2). The power electronics (3) then convert the DC voltage pulse width modulated into a staircase-shaped alternating voltage. The internal transformer (4) stands for a galvanic potential separation and voltage adjustment on the secondary side. On the output side rectification is achieved by fast power diodes (5). On the output side a constantly smoothed and fully controllable DC voltage is generated.
Customer Benefits
Especially adapted for Multiple Output Rectifier Cabinets the psp family Modules and Plug-in Units offer a high packaging density. Furthermore they are featured with a central feed-in as well as a central interface for communication and cooling.
Due to the customer-specific design the Multiple Output Rectifier Cabinets are particularly efficient.
Module | Plug-in Unit | |
Mains Voltage: | 230 V / 50-60 Hz | 230 V / 50-60 Hz |
Output Power max.: | 1 kW | 1 kW |
Current Range max.: | 100 A | 100 A |
Voltage Range max.: | 400 V | 400 V |
Cooling: | Forced air-cooled | Forced air-cooled |
Dimensions (W/D/H): | 280/306/178 [mm] | 251/406/141 [mm] |
Weight: | 7 kg | 9 kg |
Drawing Module
Maßbild Einschub
Interfaces
Option: Analog, Profibus DP, ProfiNET, Modbus